When choosing the right set of hardware for your Dedicated Server, the options can become overwhelming. Which CPU will serve you best? How much storage do you need? Should you add a remote KVM for LOM access to your machine? With so many factors to consider, one often gets taken for granted: the actual amount of RAM you need.
The old logic of building a system has held that you should always add as much RAM as possible for the quickest performance. But, is that going to amount to overkill for your application? How much is enough and how much is too much (or is there such a thing)? After all, you will rarely find RAM upgrades for free, so you should decide what amount makes sense for your needs and your budget.
How Does RAM Improve the Performance of a Dedicated Server?
To start the discussion, we should consider what RAM actually does for a server’s performance. In essence, it acts like short-term memory, holding data gathered from the hard drive for quick and easy access. When it needs to access other data, it just “forgets” the older memory and acquires the new data. Each time it does that, though, it needs to have the CPU access the hard drive for it. That takes computing power from the CPU and creates lag while it locates the required data on the hard drive. Operations pulling simply from RAM execute very quickly, and since more RAM reduces the number of times the server has to access the hard drive it can speed things up considerably.
How Much RAM Do You Actually Need?
This brings us back to the original question about how much RAM you actually need. Since RAM is not free, you need to balance its potential performance improvements against your actual needs and budget. To do that, consider a few factors that can impact server performance vis-à-vis the amount of RAM the system has.
The operating system serves as the software foundation upon which you will build all other elements of whatever operates on your server. As such, your choice of operating system can have a big impact on the amount of RAM you require. In most cases, modern operating systems have minimum recommended RAM requirements. These operating systems have been tested and finely tuned to operate at peak efficiency on systems with at least those minimum hardware specifications. Thus, you can use this as a good starting point for figuring out the minimum amount of RAM you will need.
If you have one, a control panel will require some memory assets to operate. Many users forego a control panel to offset the potential memory drain and performance ding. Yet, you may require these programs for your particular operation (particularly if you host multiple clients from a single Dedicated Server).
Content Management System
Like a Control Panel, not every Dedicated Server will utilize a Content Management System (CMS) like WordPress, Joomla, or Drupal. But, if yours does, you will probably need more RAM than a system that does not. The CMS usually resides largely in RAM while operating. Thus, you will need even more RAM to perform other functions on the server. No bright-line rules exist for adding RAM based on your choice of CMS. However, the web has dozens of forums in which you can likely find advice on this topic.
Stacked on top of operating systems (and sometimes control panels and CMSs), applications like email, firewall, and anti-virus can also take up considerable space in your Dedicated Server’s memory. As a result, these might increase your need for additional RAM.
Static or Dynamic Content
If your Dedicated Server hosts a lot of dynamic content, it will need more RAM. If, on the other hand, you have a set-it-and-forget-it operation, you will require less memory.
Depending on your set up, this feature could actually reduce your system’s memory requirements. A properly configured cache that uses a proxy server could both improve system performance and reduce RAM usage. Best for static sites, many Dedicated Server operators have benefited greatly from this option. However, the requirements for caching may also increase your expenses, so be sure to balance that against the cost of the actual RAM itself. In some cases, it may make sense to both cache and add RAM.
Possibly one of the biggest determining factors, sites with more traffic require more RAM to serve pages to more visitors. A site serving hundreds probably requires less RAM than a site serving millions (though, the latter situation may also require additional servers).
Finding the Perfect Solution for Your Dedicated Server
As you can see, your ideal amount of RAM depends on how far you want to push your Dedicated Server’s performance. While you cannot really have too much RAM from a performance perspective, you could get more than your budget will allow. So, balance your performance expectations with your financial situation and choose the solution that makes the most sense for you.
If you would like to explore your options, visit InMotion Hosting’s Dedicated Server page. Alternatively, you can live chat with one of our friendly and knowledgeable salespeople who will be happy to help you put together a Dedicated Server configuration ideal for your needs.